Tuesday, June 17, 2014


knife set TRMS Professional Knife Set & Accessories knife set




http://teamredmarketingstrategies.com



Consider the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a vast variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many multifaceted uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not approved.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a magnificent source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a delicate point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes dicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large abundance of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be sturdy, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other robust materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





knife set

http://youtu.be/qiWJtcf499E

http://bonerank.com.co/kitchen-knives-trms-professional-knife-set-accessories-kitchen-knives/





http://youtu.be/bu2w8p9o9m0



kitchen knives TRMS Professional Knife Set & Accessories kitchen knives




http://teamredmarketingstrategies.com



Think over the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a enormous variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many multifaceted uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not endorsed.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a first-rate source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a delicate point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes slicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large volume of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be sturdy, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other solid materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





kitchen knives

http://youtu.be/O9wEb1GxL2M

http://raulista.me/cutting-board-trms-professional-knife-set-accessories-cutting-board/





http://youtu.be/qiWJtcf499E



cutting board TRMS Professional Knife Set & Accessories cutting board




http://teamredmarketingstrategies.com



Take in to account the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a immense variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many all-around uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not suggested.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a first-rate source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a weak point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes dicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large abundance of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be substantial, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other strong materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





cutting board

http://youtu.be/kp2Ue5-c7Y4

http://raulista.me/japanese-chef-knives-trms-professional-knife-set-accessories-japanese-chef-knives-2/





http://youtu.be/O9wEb1GxL2M



professional chef knives TRMS Professional Knife Set & Accessories professional chef knives




http://teamredmarketingstrategies.com



Dream of the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a massive variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many functional uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not suggested.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a first-rate source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a weakened point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes slicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large quantities of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be strong, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other durable materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





professional chef knives

http://youtu.be/kp2Ue5-c7Y4

http://raulista.me/japanese-chef-knives-trms-professional-knife-set-accessories-japanese-chef-knives-2/





undefined



japanese chef knives TRMS Professional Knife Set & Accessories japanese chef knives




http://teamredmarketingstrategies.com



Look at the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a monumental variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many multifaceted uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not approved.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a great source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a weakened point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes dicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large volume of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be sturdy, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other strong materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





japanese chef knives

http://youtu.be/YICWo69cL3U

http://raulista.me/ceramic-knives-trms-professional-knife-set-accessories-ceramic-knives/





http://youtu.be/kp2Ue5-c7Y4



cutlery sets TRMS Professional Knife Set & Accessories cutlery sets




http://teamredmarketingstrategies.com



Think over the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a massive variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many multifaceted uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not endorsed.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a first-rate source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a weak point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes slicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large abundance of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be solid, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other durable materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





cutlery sets

http://youtu.be/Kh1XljuOJKk

http://raulista.me/ceramic-knives-trms-professional-knife-set-accessories-ceramic-knives/





http://youtu.be/YICWo69cL3U



santoku TRMS Professional Knife Set & Accessories santoku




http://teamredmarketingstrategies.com



Consider the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a immense variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many versatile uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not recommended.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a good source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a weakened point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes dicing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large amounts of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be strong, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other strong materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





santoku

http://youtu.be/6RNdIgZnaDQ

http://raulista.me/ceramic-knives-trms-professional-knife-set-accessories-ceramic-knives/





http://youtu.be/Kh1XljuOJKk



paring knife TRMS Professional Knife Set & Accessories paring knife




http://teamredmarketingstrategies.com



Dream of the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a magnificent variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many handy uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not recommended.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a first-rate source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a delicate point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes mincing easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large amounts of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be substantial, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other heavy-dauty materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





paring knife

http://youtu.be/4ZCJ9obhrak

http://raulista.me/ceramic-knives-trms-professional-knife-set-accessories-ceramic-knives/





http://youtu.be/6RNdIgZnaDQ



ceramic knives TRMS Professional Knife Set & Accessories ceramic knives




http://teamredmarketingstrategies.com



Keep in mind the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a enormous variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many multifaceted uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not suggested.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is an excellent source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a delicate point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes cutting easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large abundance of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be hardy, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other robust materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





ceramic knives

http://youtu.be/7ct6Y-L_5EY

http://fhstudio.co/wusthof-knives-trms-knives-accessories-wusthof-knives/





http://youtu.be/4ZCJ9obhrak



knife sharpener TRMS Professional Knife Set & Accessories knife sharpener




http://teamredmarketingstrategies.com



Contemplate the type of knives you will need in your kitchen. Knives are available in a wide variety of shapes and sizes and can meet a magnificent variety of needs. The cutlery you'll need depends on your cooking style and habits.



• A good basic kit for the average home cook would include:

o An all-purpose utility knife (5 inches) - used for a range of foods as it has many adaptable uses.

o A chef's knife (7,8-9 inches) - used for chopping, dicing, mincing, and cutting.

o A paring knife (3") - used for peeling, cutting, and trimming small vegetables such as potatoes and onions.

o A serrated bread knife is used for bread, cake, fruit, and tomatoes.

o A cleaver - used for meat and cutting through bone..

o A fillet knife for filleting fish.

o A carving knife for carving roasts, hams and poultry.

o Sharpening steel or knife-honing stone. Electric sharpeners are not recommended.



• You can usually buy a knife set containing most or all of this set. More times than not, it will be cheaper than buying the knives separately.



Shop around for your knives. The internet is a magnificent source to find good prices on quality brands and many wholesalers have buy-direct websites to get their knives at great prices. Be sure to visit a brick and mortar store to handle the various knives and get a feel for them.



When buying knives, hold each knife in your hand. The grip should be comfortable and sit well in your hand. Be aware that what one person finds comfortable does not necessarily mean it will be comfortable for you, so while advice is helpful, test for yourself.



Look at the steel content in the knife as well as where it is located. Look for any signs of joining or welding, particularly in the hilt of the knife. This is a fragile point in the knife and should be avoided as weak knives are more likely to bend or break at this joining point. The best knives are made from a single piece of steel, hand-forged. These, of course, are more expensive. Cheap knives will be thin with insubstantial hilts and handles covered thickly in plastic.



Feel the weight of the knife. A lightweight knife is good for speed and precision, whereas a heavy knife requires more work when chopping a lot of light ingredients. However, a heavy knife is best for chopping solid foods such as nuts and other harder ingredients.



The balance of the knife. Quality knives tend to have great balance. To test the balance, place your finger at the finger grip at the hilt or blade-end of the handle, holding the knife horizontally with the cutting edge down. A quality, well balanced knife will balance at that point and not fall off your finger.



• A well balanced knife makes cutting easier and requires less effort. It is essentially the leverage point and it has to be at a specific point or it is unbalanced. If you are using the knife a lot for large quantities of ingredients, a balanced knife offers far less strain on the arm.



Look at the hilt of the knife. It should be hardy, easy to clean and well joined. It is the most solid part of the knife where the strain of pressing on the handle travels through into the blade. It's not a good sign if it is thin or there is evidence of a weld or join.



What is the handle made of? The handle is often made of wood, plastic, toughened resins and other reinforced materials. Low density or soft woods or other low density materials are not recommended for knife handles.



Maintaining your knives. For a good quality set, also invest in a steel and a sharpening stone. The steel maintains a nice cutting edge, but will not give the knife one if it has gone blunt without a lot of work. Stones will restore an edge or improve an existing cutting edge.



• A diamond steel can cost a lot more, but will give a very fine edge. They also wear the knife down faster so knives can start to take a curved or sickle shape if care is not taken when sharpening. Very often people sharpen the middle of the blade on the steel, which also often happens most when you sharpen it with high speed. (As you see on TV) Take it slowly and evenly down the whole length of the blade, so it wears and sharpens evenly.



• Do not use the knife on stone, glass, steel or ceramic cutting boards or surfaces. This damages the knife and can cause the knife to slip and cause an injury. Bamboo, wood and rigid plastic are the best cutting boards.





knife sharpener

http://youtu.be/Yw2A6KTXQYI

http://fhstudio.co/wusthof-knives-trms-knives-accessories-wusthof-knives/





http://youtu.be/7ct6Y-L_5EY